< Back

ST-STA-010-XX-XX CELERITY Tyre Pilot Stator/Valve 10" Single Tyre (SOLD SINGULARLY)

ST-STA-010-XX-XX CELERITY Tyre Pilot Stator/Valve 10"  Single Tyre (SOLD SINGULARLY) ST-STA-010-XX-XX CELERITY Tyre Pilot Stator/Valve 10"  Single Tyre (SOLD SINGULARLY) ST-STA-010-XX-XX CELERITY Tyre Pilot Stator/Valve 10"  Single Tyre (SOLD SINGULARLY)

CELERITY Tyre Pilot Stator/Valve 10"  Single Tyre (SOLD SINGULARLY)

 

NB: If you're existing pipe is the 290mm one this shorter one will fit and is a new version. It was adapted so it could also be used on a steer axle and the old version (long one) is no longer available.

This stator screws to the hub cap

Number 3 on the diagram

There is a 4" version - 04382100700

TPMS and or TPRS Revision 30 became a legal requirement in the EU on trailers from July 2024 as part of homologation requirements. As of July 2024 it is ambiguous whether TPMS will become a UK requirement.

To achieve safe tipping trailer operations it is imperative that the tyres on the trailer are at correct legal pressures. Even small differences can create a hazard whilst tipping. In extreme situations the rear axle is receiving extreme forces and the tyres should be at 9 bar pressure or else they will deform incorrectly and provide a greater chance of instability and tip over.