< Back

2024 Knapen Agricultural Moving Floor Trailer Manual Print

Newton Trailers Limited BESPOKE TO YOU Parts Manual

Valid Until 07/12/2024

New 2024 Knapen Agricultural Moving Floor Trailer

Stock No: SN1111


Link to latest version

This parts manual is written bespoke to the trailer you purchased. This manual lists all the parts that are applicable to your trailer that we have on stock. The prices quoted are valid for 2 weeks from issue of the manual. You can refresh the manual by logging on to our website www.newtontrailers.com or calling 01525 872466 for a refreshed manual. You can see the trailers you purchased from us online. Inevitably due to the complexity of writing individual manuals for several thousand trailers the manual may not be correct for some of the parts on your trailer and it is best if you check the picture and detail for each part before purchase. You can do so online with a credit card.

HAPPY HUNTING.

Contents:

  1. Knapen Agricultural Moving Floor Body Front
  2. Knapen Agricultural Moving Floor Body Nearside
  3. Knapen Agricultural Moving Floor Body Offside
  4. Knapen Agricultural Moving Floor Body Rear
  5. Dawbarn Hydroclear Automatic Sheet System Walking Floor > 2017 - onwards
  6. Knapen Agricultural Moving Floor Moving Headboard And Floor Planks
  7. Cargo Floor CF500 SLC Control Valve June 2012 - Present
  8. Cargo Floor 21 Plank Slat System (Singles)
  9. Knapen Agricultural Moving Floor Chassis Front
  10. Knapen Agricultural Moving Floor Chassis Nearside
  11. Knapen Agricultural Moving Floor Chassis Offside
  12. Knapen Agricultural Moving Floor Chassis Rear
  13. SAF Lift Axle B9 Axle
  14. CELERITY® Tyre Inflation System For SAF On WABCO or KNORR BREMSE or HALDEX
  15. SAF S9-4218 Hub & Drum Brake Spare Parts
  16. SAF Axle B9 Suits B9 22K01 and B9 22S Variants
  17. SAF BI9-22S Integral Hub & Disc 22.5" Spare Parts
  18. WABCO EBS Brake System Spare Parts
  19. Aspoeck Spare Parts Exploded Diagram - Knapen Agricultural Moving Floor
  20. SAF Tyre Pilot Pressure Monitoring System Spare Parts
  21. Aspoeck Tyre Pilot Pressure Monitoring System TPMS Spare Parts
  22. Wheels / Rims Aluminium and Steel
  23. Workshop Facilities
  24. Terms and Conditions

1. Knapen Agricultural Moving Floor Body Front

Dawbarn for Knapen Moving Floor Cover Sheet Front Hood (Or Dome) 6" (150mm) High x 99" Wide Knapen Front Headboard Suzie Support Bracket Knapen Front Headboard Suzie Support Bracket Knapen Front Headboard Cover Plate Bracket - 21 Plank System Knapen Front Headboard Cover Plate Bracket - 21 Plank System Dawbarn Plastic/ Nylon Wear Strip for Hydroclear Front or Rear Hoods Vosa Or MOT Plate Certificate Holder For VTG6A W 184 x H 204 Aspoeck Front Marker Light White Unipoint ASS3 0.5 meter lead - Used in the headboard lower position Aspoeck Front Marker Light White Unipoint ASS3 0.5 meter lead - Used in the headboard lower position Knapen Powersheet Arm Knapen Broom Holder Clamp Knapen Powersheet Motor Controller 24v G2 Knapen Powersheet Base Arm Knapen Powersheet Upper Arm Left Closing Knapen Powersheet Pivot Point Left Closing Knapen Ladder Headboard Upper Bracket Knapen Ladder Lower Bracket Knapen Headboard Ladder To Be Cut Down To Requied Size. Knapen Headboard Ladder To Be Cut Down To Requied Size. Knapen Profile Front Bulkhead Profile L=2950 Knapen Aluminium lower limb Knapen Profile Front Bulkhead Top Rail Profile Knapen Barn Door Lock Bolt On Keeper Knapen Barn Door Lock Bolt On Keeper Knapen Door Locking Bar Aluminium Profile Knapen Door Locking Bar Aluminium Profile Knapen Rear Door Locking Handle Knapen Rear Door Locking Handle Retaining Catch Knapen Rear Door Locking Handle Retaining Plate Knapen Headboard Man Door c/w Welded Hinges and Locking Bar. Knapen Front Headboard Power Sheet Support Bracket for Power Sheet Arm

2. Knapen Agricultural Moving Floor Body Nearside

Top Rail Profile For Trailers With Moving Headboard UK Nearside Or Left-Hand L=13468 mm Knapen Top Rail Front Outer Corner Profile For Trailers With Moving Headboard Knapen Profile Front Bulkhead Profile L=2950 Knapen Aluminium Side Panel Wall Profile Or Plank 478mm Wide - 3100mm Tall - From 2017 White / Silver ECE104 Reflexite Reflective Tape Sold Per Metre Knapen NEXT Door Retainer Aluminium Knapen Cover Plate, Type 2 - Left Hand (UK NS) Aspoeck Unipoint 1 - Side Marker - Lens With LED And Screws Knapen Cover Sheet Stop Knock Down Knapen Cover Sheet Stop Knock Down Knapen Cover Sheet Stop Knock Down Knapen Cover Sheet Stop Knock Down White / Silver ECE104 Reflexite Reflective Tape Sold Per Metre Knapen Alu Rear Corner Post Profile 3100 mm Knapen Alu Rear Corner Post Profile 3100 mm Knapen Power Sheet Tube L=13320mm Knapen Power Sheet Tube L=13320mm Knapen Rear Panel Type 40 Left.

3. Knapen Agricultural Moving Floor Body Offside

Top Rail Profile For Trailers With Moving Headboard UK Offside Or Right Hand L=13468mm Knapen Top Rail Front Outer Corner Profile For Trailers With Moving Headboard Knapen Profile Front Bulkhead Profile L=2950 Knapen Alu Rear Corner Post Profile 3100 mm Knapen Aluminium Side Panel Wall Profile Or Plank 478mm Wide - 3100mm Tall - From 2017 Knapen NEXT Door Retainer Aluminium Knapen NEXT Aluminium Lower Limb - (Bottom Rail) 13600mm Aspoeck Unipoint 1 - Side Marker - Lens With LED And Screws Knapen NEXT Aluminium Lower Limb - (Bottom Rail) 13600mm NEWTON TRAILERS LOGO WHITE/SILVER VC104 + Orafol Reflexite Reflective Tape - PER METRE NEWTON TRAILERS LOGO WHITE/SILVER VC104 + Orafol Reflexite Reflective Tape - PER METRE BAR STICKER Cover Sheet Arch Warning Decal - 'Bar' with Arrow BAR STICKER Cover Sheet Arch Warning Decal - 'Bar' with Arrow BAR STICKER Cover Sheet Arch Warning Decal - 'Bar' with Arrow Knapen Rear Panel Type 40 Right.

4. Knapen Agricultural Moving Floor Body Rear

Dawbarn for Knapen Moving Floor Cover Sheet Rear Hood (Or Dome) 6" (150mm) High x 99" Wide Knapen NEXT Rear Top Header Bar Double Locking From 2017 Dawbarn Plastic/ Nylon Wear Strip for Hydroclear Front or Rear Hoods Knapen Security Pin For Upper Beam Knapen Security Pin For Upper Beam Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Hinge Alloy Profile For Standard Doors Alu Hinge L=95 Up To 2016 - 17 Knapen Door Locking Bar Stainless Steel Bar Ø 30 For Standard Doors L =2960 Mts Pre 2018 Knapen Door Locking Bar Stainless Steel Bar Ø 30 For Standard Doors L =2960 Mts Pre 2018 Knapen / Kraker Moving Floor Rear Door Seal or Rubber - Per Metre Marker Board - Honeycomb Aluminium Marker Board - Honeycomb Aluminium Knapen Rear Door Locking Handle Retaining Plate Knapen Rear Door Locking Handle Knapen NEXT Double Locking Barn Doors To Suit Recyling Spec - Complete Pair

5. Dawbarn Hydroclear Automatic Sheet System Walking Floor > 2017 - onwards

Dawbarn Bespoke Manual Roll Over Cover Sheet Replacement For A Walking/Moving Floor - Batten Fix Dawbarn Cover Sheet Pole Aluminium 50.8 mm x 4.76mm inner wall x 13500mm Dawbarn Hydroclear Sheet Centre Pole 3.5" For Walking / Moving Floor Trailer - 13411mm Dawbarn Hydroclear Sheet MOTOR 200cc 4 BOLT Fixing For Center Pole 2018 on Dawbarn Hydroclear 4 BOLT Torque Arm For Automatic Roll Over Sheet System Dawbarn Plastic/ Nylon Wear Strip for Hydroclear Front or Rear Hoods Dawbarn Hydroclear Power Pack Dawbarn Hydroclear - Electro Solenoid For Powerpack Dawbarn Hydroclear Side Sheet Motor 100cc & Disc Brake For Strap System fitted from 2018 onwards Dawbarn Hydroclear 3 Strap Set for Walking / Moving Floor Trailers Dawbarn Hydroclear 2 Strap Set for Walking / Moving Floor Trailer Dawbarn Hydroclear STRAP CLAMP Complete Anderson / Suzie Lead for Powered Cover Sheet 175 Amp Hydroclear & Wraptor Dawbarn PANTHER Remote Control Receiver & Keyfob Remote Kit For Electric Roll Over Sheet System New in 2017 Dawbarn Remote Control Keyfob For Hydroclear Electric Sheet System - For Blue Receiver Box Cover Sheet Batten Strip Half Moon - (Per Metre)

6. Knapen Agricultural Moving Floor Moving Headboard And Floor Planks

Moving Headboard Floor Side Mat for Walking / Moving Floor Trailers - Blue Headboard Handle Walking Floor Moving Bulk Headboard Chariot New 4 Roller & Brush Head Moving Bulk Headboard Chariot New 4 Roller & Brush Head Moving Headboard Floor Side Mat for Walking / Moving Floor Trailers - Blue Moving Bulk Headboard Bracket/Plate Right Hand Side Moving Bulk Headboard Bracket/Plate Left Hand Side Newton Trailers Moving Headboard Kit Moving Headboard Floor Mat for Walking / Moving Floor Trailers (Blue) Cargo Floor Plank 10mm x 112mm Ridged Single Seal No Seal or EndCap Newton Trailers Floor Plank End Cap 112mm Aluminium with Newton Trailers Logo (Single) Cargo Floor Plank 10mm x 112mm Ridged Revision Set (20+1) with End Caps and 7 Block Bearings

7. Cargo Floor CF500 SLC Control Valve June 2012 - Present

Cargo Floor CF500 SL2 & SL-C E Control Valve Complete - 2007 Onwards Cargo Floor Cartridge Valve & Solenoid Load/Unload G02 (Black Top) For CF300 CF500 SL1 SL2 SLC Cargo Floor Cartridge Valve & Solenoid Load/Unload G02 (Black Top) For CF300 CF500 SL1 SL2 SLC Cargo Floor Cartridge Valve & Solenoid Load/Unload G02 (Black Top) For CF300 CF500 SL1 SL2 SLC Cargo Floor Cartridge Valve & Solenoid Start/Stop GS02 (Red Top) For CF300 CF500 SL1 SL2 SLC Cargo Floor Cartridge Valve & Solenoid Start/Stop GS02 (Red Top) For CF300 CF500 SL1 SL2 SLC Cargo Floor CF300 & 500 Threaded Rod Complete 1000mm Cargo Floor Control Valve Blue Plastic Cover/Box 02 Cargo Floor Cover for Switching Piston Control Valve 02 Complete Cargo Floor Cover for Switching Piston Control Valve 02 Complete Cargo Floor Switching Plunger L = 146 mm [5.7"] / D = 35 mm [1.4"] Complete Cargo Floor Switching Plunger L = 146 mm [5.7"] / D = 35 mm [1.4"] Complete Cargo Floor CF500 Control Valve Switching Shaft 16mm x 306mm - Shaft Complete With Seals and Scraper Cargo Floor CF500 Control Valve Switching Shaft 16mm x 306mm - Shaft Complete With Seals and Scraper Cargo Floor Head for Operation Plunger Housing Control Valve 02 Complete Cargo Floor Head for Operation Plunger Housing Control Valve 02 Complete Cargo Floor Head for Operation Plunger Housing Control Valve 02 Complete Cargo Floor Head for Operation Plunger Housing Control Valve 02 Complete Cargo Floor Operation plunger L = 195 mm. / D = 25 mm. complete Cargo Floor Operation plunger L = 195 mm. / D = 25 mm. complete Cargo Floor Socket Plug 3/4" With O-Ring Cargo Floor Socket Plug 3/4" With O-Ring Valve Plunger Collar Joining Piece Round (Switching Valve) Valve Plunger Collar Joining Piece Round (Switching Valve) Cargo Floor Socket Plug 3/4" With O-Ring Cargo Floor Socket Plug 3/4" With O-Ring Cargo Floor CF500 SL2 Oil Seal Kit For Control Valve Cargo Floor Socket Plug 3/4" With O-Ring Cargo Floor Socket Plug 3/4" With O-Ring Cargo Floor CF500 Control Valve Pressure Relief Cartridge Valve - This suits CF500 SL1, SL2 & SLC Cargo Floor CF500 Control Valve Pressure Relief Cartridge Valve - This suits CF500 SL1, SL2 & SLC Cargo Floor CF500 SL2 Oil Seal Kit For Control Valve Cargo Floor CF500 SL2 Oil Seal Kit For Control Valve Cargo Floor CF500 SL2 Oil Seal Kit For Control Valve Cargo Floor CF500 SL2 Oil Seal Kit For Control Valve Cargo Floor Minimess plug (0-225 Bar) Cargo Floor Minimess plug (0-225 Bar)

8. Cargo Floor 21 Plank Slat System (Singles)

Cargo Floor Plank 6mm x 112mm Smooth Double Seal No Seal or End Cap Cargo Floor Plank 6mm x 112mm Smooth Double Seal No Seal or End Cap Cargo Floor Plank 6mm x 112mm Ridged Double Seal No Seal or End Cap Cargo Floor Plank 6mm x 112mm Ridged Double Seal No Seal or End Cap Cargo Floor Plank 6mm x 112mm Ridged Single Seal No Seal or End Cap Cargo Floor Plank 10mm x 112mm Ridged Single Seal No Seal or EndCap Cargo Floor Plank 10mm x 112mm Smooth Double Seal No Seal or End Cap Cargo Floor Plank 10mm x 112mm Ridged Double Seal No Seal or End Cap Cargo Floor Plank Counter Sunk Screw M12 x 30mm Zinc Plated (Single) Aluminium Square Box Extrusion 25 mm x 25mm x 2mm x 5.9 m (1"x1") Length 5960 mm Cargo Floor Plank Seal Per Metre Cargo Floor Plank Seal 300m Roll Cargo Floor Plank End Cap 112mm Aluminium with Cargo Floor Logo (x21) Cargo Floor Plank End Cap 112mm Aluminium with Cargo Floor Logo (Single) Cargo Floor Plank End Cap 112mm Plastic Blue (Single) Cargo Floor Plastic Bearing Block White, 7-112, Height 32mm Cargo Floor Plastic Bearing Block - Red/Orange 7-112, Height 35mm (Orange) Cargo Floor Plank Plastic Bearing Block (Twister Bearing ) - Single

9. Knapen Agricultural Moving Floor Chassis Front

Socket For ABS ISO 7638 Knapen Front Headboard Suzie Support Bracket Knapen Front Headboard Suzie Support Bracket Aspoeck Headboard Junction Box With 24N - 24S & 15 Pin Socket Knapen Front Headboard Cover Plate Bracket - 21 Plank System Knapen Front Headboard Cover Plate Bracket - 21 Plank System Knapen Hydraulic Pipe S-Bow or Swan Neck Coupling 25mm (Return) Knapen Hydraulic Pipe S-Bow or Swan Neck Coupling 20mm (Pressure) Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing JOST Modal Landing Leg Winding Handle - Crank 520 mm With Parking Hook JOST B0403 Modal Landing Leg UK Nearside (Driver) Comes With Foot and Handle JOST B0403 Modal Landing Leg UK Offside (Driven) JOST B0403 Modal Landing Leg UK Complete Set With Crossbar & Handle Knapen Catwalk/Platform Ladder Support Bracket Component Only - Bolt On Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing JOST B0403 Modal Landing Leg UK Offside (Driven) JOST B0403 Modal Landing Leg UK Nearside (Driver) Comes With Foot and Handle

10. Knapen Agricultural Moving Floor Chassis Nearside

Knapen NEXT Door Retainer Aluminium Knapen (New Logo)Nylon Mudguard Wing 1/2 420mm Wide WITH "Knapen" Mudlflap Knapen Nylon Mudguard Wing 1/2 420mm Wide Without Mudlflap Knapen Nylon Mudguard Wing 1/2 420mm Wide Without Mudlflap Knapen Mud Guard Bracket Wing Support Stay 565mm With Locating Lug - Single Bolt Knapen NEXT Side Guard Support/ Upright Mounting Profile Knapen NEXT Side Guard Corner Profile Plastic End Cap - Left Knapen NEXT Side Guard Rounded Corner Profile L=498mm Knapen NEXT Side Guard Corner Profile Plastic End Cap - Right Knapen NEXT Side Guard Alu L=3235 Knapen NEXT Side guard alu L=2135 Knapen NEXT Side Guard Offside Bottom / Nearside Top - Plastic End Cap Knapen NEXT Side Guard Nearside Bottom / Offside Top - Plastic End Cap

11. Knapen Agricultural Moving Floor Chassis Offside

Knapen Toolbox - Chassis Mount 1000 x 530 x 500 mm + Knapen Logo Knapen Toolbox - Chassis Mount 1000 x 530 x 500 mm + Knapen Logo Knapen (New Logo)Nylon Mudguard Wing 1/2 420mm Wide WITH "Knapen" Mudlflap Knapen Nylon Mudguard Wing 1/2 420mm Wide Without Mudlflap Knapen Nylon Mudguard Wing 1/2 420mm Wide Without Mudlflap Knapen Mud Guard Bracket Wing Support Stay 565mm With Locating Lug - Single Bolt Knapen NEXT Side Guard Support/ Upright Mounting Profile Knapen Tool Box - Chassis Mount Tool Box Support Left Knapen Toolbox - Chassis Mount Tool Box Support Right Knapen NEXT Door Retainer Aluminium Knapen NEXT Side Guard Corner Profile Plastic End Cap - Left Knapen NEXT Side Guard Rounded Corner Profile L=498mm Knapen NEXT Side Guard Corner Profile Plastic End Cap - Right Knapen NEXT Side guard alu L=2135 Knapen NEXT Side Guard Offside Bottom / Nearside Top - Plastic End Cap Knapen NEXT Side Guard Nearside Bottom / Offside Top - Plastic End Cap Knapen Mud Guard Bracket Wing Support Stay 565mm With Locating Lug - Single Bolt Knapen Mud Guard Bracket Wing Support Stay 565mm With Locating Lug - Single Bolt Knapen Mud Guard Bracket Wing Support Stay 565mm With Locating Lug - Single Bolt

12. Knapen Agricultural Moving Floor Chassis Rear

Knapen NEXT Pull Out Ladder With Platform Knapen NEXT Rear Bumper Profile 180mm Under Run Bar Fits Next Generation Trailers Knapen NEXT Rear Plate, Type 2 complete Newton Trailers Logo Mud Flap Under Run / Bumper 2409x350 - Bayonet / Slide in style Knapen NEXT Rear Bumper (Under Run) Cover Plate/ End Cap 118mm - Right Knapen NEXT Rear Bumper (Under Run) Cover Plate/ End Cap 180mm - Right Knapen NEXT Variable Bumper Bracket - Right - Type 2,3 Knapen NEXT Bumper Mounting Bracket - Right Knapen NEXT Cover Plate Right Type 1 Knapen NEXT Cover Plate Right Type 3 Knapen NEXT Rear Bumper (Under Run) Cover Plate/ End Cap 118mm - Left Knapen NEXT Rear Bumper (Under Run) Cover Plate/ End Cap 180mm - Left Knapen NEXT Variable Bumper Bracket - Left Type 2,3 Knapen NEXT Bumper Mounting Bracket - Left Knapen NEXT Cover Plate Left Type 1 Knapen NEXT Cover Plate Left Type 3 Newton Trailers Logo Mud Flap Under Run / Bumper 2409x350 - Bayonet / Slide in style Knapen NEXT Rear Bumper Profile 180mm Under Run Bar Fits Next Generation Trailers Knapen NEXT Rear Light Plate - 7-room Lamp

13. SAF Lift Axle B9 Axle

SAF Lift Axle Hanger Kit (Single) for B9-22K01 and B9 -22S Axle SAF Lift Axle Hanger Kit (Single) for B9-22K01 and B9 -22S Axle SAF Axle Airbag - IDP Twin Lift Air Bag - For The Dual Piece Lift Axle Bracket SAF B9 Lift Axle Fitting Kit, Including Collars SAF B9 Lift Axle Fitting Kit, Including Collars SAF B9 Lift Axle Fitting Kit, Including Collars

14. CELERITY® Tyre Inflation System For SAF On WABCO or KNORR BREMSE or HALDEX

SAF Tyre Pilot Hub Cap With O Ring SAF Tyre Pilot Hub Cap With O Ring Celerity Tyre Inflation Control Unit Canbus R141 WL Connector Celerity Tyre Inflation Control Unit Canbus R141 WL Connector Celerity Tyre Inflation Violet Warning Light Celerity Tyre Inflation Violet Warning Light CELERITY Tyre Pilot Stator/Valve 10" Single Tyre (SOLD SINGULARLY) CELERITY Tyre Pilot Stator/Valve 10" Single Tyre (SOLD SINGULARLY) CELERITY Tyre Inflation Rotor Thru L 150mm CELERITY Tyre Inflation Rotor Thru L 150mm CELERITY Tyre Pilot Connecting Hose SHORT/90° CELERITY Tyre Pilot Connecting Hose SHORT/90°

15. SAF S9-4218 Hub & Drum Brake Spare Parts

SAF Brake Drum 420 x 180 Intradrum SAF Brake Shoe SNK 420x180 W. B-LIN - Per Shoe SAF SNK & SKRZ Camshaft - Left - 698mm SAF SNK & SKRZ Camshaft - Right 698mm SAF Brake - Slack Adjuster SNK 420 (pair)

16. SAF Axle B9 Suits B9 22K01 and B9 22S Variants

SAF Brake Disc for Intradisc B9-22K01 and B9-22S Axle 2010 onwards SAF Hub Nut M75 Right Hand For B9 & Bi9 & S9 Axle (Axle Nut Right) SAF Hub Nut M75 Left Hand For B9 & Bi9 & S9 Axle (Axle Nut Left) SAF Wheel Stud & Nut 76mm For Intradisc, Intradisc Plus & Integral Axles SAF Wheel Stud & Nut 76mm For Intradisc, Intradisc Plus & Integral Axles SAF Hub Cap (Wheel Cap Assembly) B9 Axles From ca 2012 onwards SAF Hub Unit B9 Evo/Intradisc Axle SAF Axle ABS/EBS Sensor For Intradisc, Intradisc Plus & Integral Axles (90 Degree) 1.0M LONG

17. SAF BI9-22S Integral Hub & Disc 22.5" Spare Parts

SAF Hub Nut M75 Left Hand For B9 & Bi9 & S9 Axle (Axle Nut Left) SAF Hub Nut M75 Right Hand For B9 & Bi9 & S9 Axle (Axle Nut Right) SAF Hub Unit Bi9 Axle (i =Integral) Until 02/2019 SAF Brake Disc Bi9 Integral 22.5" 430mm SAF Wheel Stud & Nut 76mm For Intradisc, Intradisc Plus & Integral Axles SAF Hub Cap (Wheel Cap Assembly) B9 Axles From ca 2012 onwards SAF Fitting KIT For Brake Disc Bi9 Integral C/w Oil Seal & Grease SAF Brake Pads for SBS 2220 H0 / Haldex ModulT Caliper - Upto 11/2018 (Standard Version) SAF Brake Pads for SBS 2220 H01 / Haldex ModulT Caliper - From 12/2018

18. WABCO EBS Brake System Spare Parts

Wabco EBS Combined Park & Shunt Valve inc. Air Fittings WABCO (Distance Sensor) ELM Electronic Levelling Valve Wabco ABS / EBS Sensor Kit Right Angle with 1000mm 1m Cable Wabco Tail Guard connecting cable Wabco Lifting Axle Valve (single circuit) WABCO ECU/ EBS Valve Modulator With Fittings (Premium Max 4s/3m) TEBS-E6.5 Wabco Smartboard Info Center for EBS (Without Cable) Wabco ECAS ELM Control Unit WABCO ECU/ EBS Valve Modulator With Fittings (Premium Max 4s/3m) TEBS-E6.5

19. Aspoeck Spare Parts Exploded Diagram - Knapen Agricultural Moving Floor

Knapen NEXT License / Number Plate Light LED Built-In 1m Cable Aspoeck Tail Lamp Europoint III (3) (Bulb/ LED Version)- R/H With ASS2.1 - 6 Pin Connector Aspoeck Tail Lamp Europoint III (3) (Bulb/ LED Version)- L/H With ASS2.1 - 6 Pin Connector Aspoeck Superpoint outline marker lamp (straight version with open end Connection) Universal (L/H or R/H) Aspoeck Superpoint outline marker lamp (straight version with open end Connection) Universal (L/H or R/H) Aspoeck Unipoint Side Amber Marker Lamp With Fixation 45° Front & 0.5m ASS3 Connection Aspoeck Unipoint Side Amber Marker Lamp With Fixation 45° Front & 0.5m ASS3 Connection Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing Aspoeck Marker Lamp Front Unipoint I Clear LED With 1.5m P&R Fixing Aspoeck Junction Box With 14 Ports Box, 15 Female ASS3 Connector. 1 x ASS2 3 Male Pin Connector

20. SAF Tyre Pilot Pressure Monitoring System Spare Parts

SAF Tyre Pilot Hub Cap With O Ring SAF Tire Pilot System (Tri Axle Set) SAF TirePilot Basic System SAF Tyre Pilot Hub Cap With O Ring SAF Tyre Pilot Stator/Valve Single Tyre (SOLD SINGULARLY) SAF Tyre Pilot Stator/Valve Single Tyre (SOLD SINGULARLY) SAF Tyre Pilot Connecting Line Single Tyre (SOLD SINGULARLY) For Axle Kit Use N1008650 SAF Tyre Pilot Connecting Line Single Tyre (SOLD SINGULARLY) For Axle Kit Use N1008650 SAF Tyre Pilot Single Rotor SAF Tyre Pilot Single Rotor Celerity Tyre Inflation Control Unit Canbus R141 WL Connector SAF Tyre Pilot Connecting 90° Elbow SAF Tyre Pilot Connecting 90° Elbow SAF Tyre Pilot Connecting Hose SHORT/90°/Check Port SAF Tyre Pilot Connecting Hose SHORT/90°/Check Port SAF Tyre Pilot Connecting Hose Single Tyre SAF Tyre Pilot Connecting Hose Single Tyre

21. Aspoeck Tyre Pilot Pressure Monitoring System TPMS Spare Parts

Aspoeck TPMS Wheel Sensor Kit (6x Sensor, 6x Screw, 6x Sticker) Aspoeck TPMS Wheel Sensor Kit (6x Sensor, 6x Screw, 6x Sticker) Aspoeck TPMS Wheel Sensor Kit (6x Sensor, 6x Screw, 6x Sticker) Aspoeck TPMS Wheel Sensor Kit (6x Sensor, 6x Screw, 6x Sticker) Aspoeck TPMS Kit for Wabco AL Aspoeck TPMS Sticker 140 x 50 Aspoeck TPMS Sub Receiver Rx18 Aspoeck TPMS Valve Sensor (Single Wheel) Aspoeck TPMS Valve Sensor (Single Wheel) Aspoeck TPMS Sub Receiver eRx18

22. Wheels / Rims Aluminium and Steel

Alcoa Alloy Wheel Rim 11.75 x 22.5 Offset 120 Brushed Finished Alcoa Alloy Wheel Rim 11.75 x 22.5 Offset 120 Brushed Finished Alcoa LEVEL ONE Alloy Wheel Rim 11.75 x 22.5 Center Nave Alcoa LEVEL ONE Alloy Wheel Rim 11.75 x 22.5 Center Nave Alcoa LEVEL ONE Alloy Wheel Rim 11.75 x 22.5 Offset 120 Alcoa LEVEL ONE Alloy Wheel Rim 11.75 x 22.5 Offset 120 Alcoa Alloy Wheel Rim 11.75 x 22.5 Offset 120 Dura-Bright - EVO Alcoa Alloy Wheel Rim 11.75 x 22.5 Offset 120 Dura-Bright - EVO Alcoa Alloy Wheel Rim 11.75 x 22.5 Center Nave Dura-Bright Alcoa Alloy Wheel Rim 11.75 x 22.5 Center Nave Dura-Bright Steel Wheel Rim 11.75 x 22.5 Offset 120 Steel Wheel Rim 11.75 x 22.5 Offset 120 Steel Wheel Rim 11.75 x 22.5 Centre Nave Steel Wheel Rim 11.75 x 22.5 Centre Nave

We have a state-of-the-art workshop of the future too

Not only do we supply the parts in this manual – we can fit them for you as well.

Floor Welding

Floors, tippers, curtains, blowers and more – from sheet repairs, weigher problems, to major body/chassis repairs – we can do it all

We can also help you with any maintenance, diagnosis and repairs for any of your trailers

Give us a call on 01525 872466 or email us at workshop@newtontrailers.com

Large Workshop Workshop Repairs

Terms and Conditions of Sale

GENERAL

  1. Unless otherwise agreed in writing by Newton Trailers Ltd. (hereinafter referred to as 'the Company) all orders are accepted subject to the following conditions. All other conditions whatsoever are excluded from the Contract or any variation thereof.
  2. Price shown on the website are not binding on the Company and are only available for acceptance for a maximum period of 14 days from the date viewed. The Company is not bound by any order until it has issued an acknowledgement of the order.
  3. In these conditions the word 'goods' shall mean new body work, hydraulic tipping gears and hydraulic machinery or parts thereof and all other items manufactured, serviced or supplied by the Company.

PRICES

  1. All prices are quoted net ex-works and are subject to fluctuation in the event of any increase in the cost of labour due to National Awards or increase in the costs of materials and overheads. Any increase in such costs during the period of production will be added to the quoted price.
  2. In the event of any alteration being required by the buyer in design specification or quantities the Company shall be entitled to make an adjustment of the Contract price corresponding to any increased cost incurred by the Company as a result of such alteration.
  3. The cost of carriage and packaging if required by the buyer shall unless otherwise stated be charged extra. The cost of packing cases will be credited to the buyer on their return to the Company in good condition carriage paid within one month of despatch to the buyer.
  4. We have decided to arrange the website parts supply as a deferred payment contract. Our contract to fulfill your order is not crystallized until the full process stated here is complete. This means we have decided not to take your money when you enter and process your credit card transaction. We will review your order after you have entered your credit card details and sent them as an order to us. If we cannot fulfill your order we will contact you either by your telephone number or via your email address. We will then void your payment transaction. The primary reason for this arrangement is to give you a better service and not have you believe goods are available when they are not. There is an explicit second reason. That being, should we have made a gross error of data inputting on our website be it price (either higher or lower than stated), stock level or specification of goods then we cannot complete the contract process and the transaction is deemed void.

DELIVERY

  1. Delivery shall be taken by the buyer within seven days of notification that the goods are available. Where payment is not made and/ or where the buyer does not accept delivery within seven days of notification the buyer shall pay interest on the total account from the date of notification until the date of payment at the rate of two per cent per annum over Barclays Bank Plc. base rate for the time being on a day to day basis with a minimum interest charge of five per cent per annum.
  2. In addition to such interest as herein before charged the buyer shall be liable to the Company for any loss or costs arising from non-payment non-acceptance of delivery and for a reasonable charge by the Company for the care custody storage and insurance of the goods and the Company shall be at liberty to sell the goods and retain all unpaid charges out of the proceeds of sale but without prejudice to any claim the Company may have against the buyer in respect of any loss so arising to the Company.
  3. Time for delivery is given as accurately as possible but is not guaranteed. The buyer shall have no right to damages or to cancel the order for failure for any cause to meet the delivery time stated. Date of delivery shall in every case be dependent upon receipt of final instructions and approvals being obtained from the buyer.
  4. Subject as herein before provided the Company will endeavour to comply with reasonable requests by the buyer for postponement of delivery but shall be under no obligation to do so. Where postponement is agreed by the Company in writing the buyer shall pay all costs and expenses including a reasonable charge for storage occasioned thereby. Times quoted for delivery refer only to the date of completion of the goods at the Company's works.

RISK INSURANCE

  1. Risk shall pass to the buyer when the goods or the relevant part thereof the premises of the Company for the delivery to the buyer not withstanding that the Company may be responsible for delivery.
  2. Notwithstanding delivery and the passing of risk the title in the goods shall not pass to the buyer until the buyer shall have paid in full all moneys owing under this or any other contract with the Company.
  3. If the buyer shall be in breach of the terms of the contract then all moneys owed by the buyer to the Company, whether under this Contract or otherwise, shall become immediately due and payable and the buyer hereby grants to the Company or its agents an irrevocable licence to enter upon the buyer's premises to recover and/or resell such goods as the Company may deem necessary to recover all sums owing to it by the buyer together with any reasonable costs of the Company so incurred.
  4. Until all moneys owing to the Company (whether under this contract or otherwise) have been paid in full the goods shall remain the absolute property of the Company and the buyer shall hold the goods in a fiduciary capacity as bailee, and shall keep the goods separate from those of the buyer and third parties and properly stored, protected and insured and identified as the Company's property, but shall be entitled to resell or use the goods in the ordinary course of its business.
  5. If these terms are held to be invalid to reserve the Company's title to the goods delivered under this contract by reason of the reservation of title until all goods delivered to the buyer by the Company have been paid for then nevertheless ownership of the goods delivered under this Contract shall remain with the Company until those goods themselves have been paid for.
  6. The buyer shall not be entitled to pledge or in any way charge by way of security for any indebtedness any of the goods which remain the property of the Company but if the buyer does so, all moneys owing by the buyer to the Company shall (without prejudice to any other right or remedy of the Company) become immediately due and payable.
  7. In the event of the goods or any part thereof being constructed, erected or incorporated in any part of the buyer's property or property belonging to a third party which is in the possession and control of the buyer, then in the event of:
    1. The sale of such property the buyer shall hold that part of the proceeds of sale of the said property as is attributable to the goods (or such part of the goods as are contained in or affixed to the said property) on trust for the Company and will account to the Company for the part of the said proceeds of sale as are attributable to the goods.
    2. The Company becoming entitled to repossess any goods by virtue of these conditions then the Company may take such steps as reasonably necessary to remove from the said property the goods which belong to the Company and the buyer shall be responsible for any damage to the goods and/or the said property howsoever occasioned.

MOT'S

  1. Customers who book an MOT must appear on site at Ridgmont and have made themselves to the MOT reception 15 minutes prior to their test time.
  2. Failure to attend at the correct booked test time will mean that the customer agrees to being charged in full for the test as if they had attended as contracted. There will be no refunds for non attendance under any circumstances. It is totally up to the discretion of the VOSA and Newton staff should a vacant slot be available to allow the customer to remain on site at Ridgmont and be tested.
  3. In the event that a VOSA member of staff is not on site to carry out MOT inspections then Newton will refund the test fee to the customer. Newton Trailers Limited cannot be held liable for any consequential losses; such as travel time; loss of hours; loss of business caused by non attendance of VOSA staff. In effect this is force majeure.
  4. Should Newton not be able to test on a particular booked day Newton will endeavour (but not guarantee) to notify the customer of this date cancellation and refund in full the fees taken for that test.
  5. We are unable to test trailers/vehicles which carry dangerous goods at the time of the test.

CANCELLATION

Cancellation will only be agreed by the Company on condition that all costs and expenses incurred by the Company up to the time of cancellation and all loss of profits and other loss or damage resulting to the Company by reason of such cancellation will be reimbursed by the buyer to the Company forthwith.

TERMS OF PAYMENT

  1. If the buyer shall make default in or commit breach of the Contract or of any of its obligations to the Company or in case of non-payment or threatened non-payment of any instalment due under the Contract or if any distress or execution shall be levied upon the buyer's property or assets or if the buyer shall make an offer to make any arrangement or composition with creditors or commit any act of bankruptcy or if any petition or receiving order in bankruptcy shall be presented or made against him or if the buyer is a limited company and any resolution or petition to wind up such company's business shall be passed or presented (otherwise than for reconstruction or amalgamation) or if a receiver of such company's undertaking property or assets or any part thereof shall be appointed the Company shall have the right forthwith to determine any Contract then subsisting and upon written notice of such determination being posted by the Company to the buyer's last known address any subsisting Contract shall be deemed to have been determined without prejudice to any claim or right the Company might otherwise exercise.
  2. Goods may be returned for credit only at the discretion of the Company but will then be subject to a handling charge.

DESIGN AND DATA

  1. Illustrations, weights, measures and performance schedules set out in the sales literature of the Company including this website are statements of opinion and are provided for information only and form no part of the Contract.
  2. The Company reserves the right without notice and without affecting and validity of the Contract to make such changes and / or improvement in materials, dimensions and design as it thinks reasonable and desirable.
  3. It is an express condition of acceptance of an order that unless otherwise agreed goods sold by the Company shall not be exhibited by the buyer nor shall he permit them to be exhibited at any exhibition in the United Kingdom.

GUARANTEE

The following guarantee shall apply (and in this clause the term 'goods' is defined within the limitations set out in sub-clause (6) hereof).

  1. Subject to the following provisions the Company guarantees that the goods have been manufactured in a good and workmanlike manner to a reasonable standard and with materials suitable for the purpose. This guarantee shall not apply if:
    1. the goods cease to be owned by and in the possession and control of the buyer.
    2. in the case of hydraulic tipping gears and body work a load has at any time been imposed in excess of the chassis and tipping gear manufacturer's recommendations.
    3. the goods have without written consent of the Company been altered or repaired otherwise than by the Company.
    4. any tipping gear has been fitted by any person other than in accordance with the Company's current fitting instructions and drawings.
    5. designs other than the Company's own are used or work is done contrary to its standard practice or against its advice.
    6. defects are aggravated by continued use after the defects ought reasonably to have been discovered.
    7. if a body has been fitted which in the opinion of the Company is unsuitable.
  2. No condition is made or to be implied nor is any warranty given or to be implied as to the life or wear of the goods or that they will be suitable for any particular purpose or for use under any specific conditions notwithstanding that such purpose or condition may be known or made known to the Company.
  3. Goods represented by the buyer to be defective shall not form the subject of any claim for work done by the buyer or for any loss or damage or expense whatsoever arising directly or indirectly from such defects but such goods if returned to the Company and accepted by it as defective will at the request of the buyer and if practicable be replaced as originally ordered. Defects in quality or dimensions in any delivery shall not be a ground for cancellation of the remainder of the order or Contract.
  4. Guarantee Period: 12 months unless otherwise stated.
  5. This guarantee excludes every form of liability for every form of consequential loss or damage. The Company will only be liable under this guarantee for the exchange or repair of any part or parts which have proved to be defective as a result of faulty workmanship or materials and the Company shall not be liable for any consequential loss or damage arising out of such defects.
  6. The Company will not be responsible for any expense which the buyer may incur in removing or having removed or in replacing or having replaced any part or parts to be sent for inspection or in fitting or having fitted any new part in lieu thereof and all labour expended on any such inspection or any other work must be paid for by the buyer. The Company guarantees only those goods which are bought direct from the Company or from a Company distributor or from a motor manufacturer or bona fide motor trader or body builder (or in the case of hydraulic machine tools from a bona fide machine tool dealer). In particular this guarantee does not apply to proprietary articles not manufactured by the Company but the buyer may have the benefit of any guarantee carried by such articles which is capable of assignment.
  7. This guarantee does not cover defects attributable to fair wear and tear, dirt, mis-use neglect or accident.

LIABILITY

Except in respect of death or personal injury caused by the Company's negligence, the Company shall not be liable for and the buyer shall indemnify the Company against any claim made by reason of representation (unless fraudulent), or any implied warranty, condition or other term, or any duty at company law, or under the express terms of the contract, for any direct, special or consequential loss or damage (whether for loss of profit or otherwise) costs, expenses or other claims for compensation whatsoever (whether caused by the negligence of the Company its employees agents or otherwise) which arise out of or in connection with the supply of the goods for their use or resale by the buyer.

REGULATIONS

Where the components supplied are 'safety-critical' the liability of the Company shall be limited to the standard of production required by the appropriate quality control procedure of the Company at the relevant time and no responsibility is accepted by the Company for failure to comply with any regulations or requirements of any governmental or other authority.

CONFIDENTIAL INFORMATION

All drawings documents and other information supplied by the Company is supplied on the express understanding that the buyer will not without the written consent of the Company:

  1. Give away, loan, exhibit or sell any such drawings or extracts therefrom or copies thereof
  2. Use them in any way except in connection with the components for which they are issued.

SUB-CONTRACTORS

The Company shall be entitled to appoint one or more sub-contractors to carry out all or any of its obligations hereunder and hereinbefore.

FORCE MAJEURE

The Company shall be under no liability for any delays loss or damage caused wholly or in part by causes beyond the Company's control including without limitation any act done pursuant to a trade dispute whether such dispute involves the Company's servants or not or otherwise arising out of any act matter or thing which is out of the control of the Company.

LEGAL

  1. The Contract shall be governed and interpreted exclusively according to the Law of England and any arbitrator under the next following clause shall be governed by English Arbitration Law.
  2. Any dispute arising hereout or difference as to the interpretation of these Conditions shall be referred to the final decision of a single arbitrator in England to be nominated by the parties or in default of agreement between the parties by the President of the Society of Motor Manufacturers and Trades Limited.